Panasonic kx-ns500 Pc Programming Manual page 625

Parameter Selection (for SDN)
Specifies the delayed ringing setting for calls arriving at an SDN button.
The value specified here is only used when
10.9 PBX Configuration—[2-9] System—System Options is set to "Enable".
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
PC Programming Manual References
10.9 PBX Configuration—[2-9] System—System Options—Option 4—
Ringing with LCD
Feature Guide References
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Extension Number (for DSS)
Specifies the number of an extension to be accessed.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Number (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Number (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution group for
which messages are checked. If this cell is left empty, the PS will check its own messages only.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Number (for Group Fwd (Both))
Specifies the floating extension number of an incoming call distribution group or the extension number to set
FWD remotely whose intercom and trunk calls will be forwarded.
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
2.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)—SUMMARY
2.3.2 Call Forwarding (FWD)
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
System Wireless—SDN Delayed Ringing with LCD on
System Wireless—SDN Delayed
PC Programming Manual 625