Panasonic kx-ns500 Pc Programming Manual page 712

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
DIL Destination—Day, Lunch, Break, Night
Specifies the DIL destination in each time mode.
Value Range
Max. 5 digits (consisting of 0–9)
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Feature Guide References
2.1.1.2 Direct In Line (DIL)
4.3.1 TIE Line Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Value Range
1–8
Feature Guide References
2.1.1.2 Direct In Line (DIL)
5.1.3 Tenant Service
5.1.4 Time Service
UM Service Group No.
Specifies the Service Group number sent to the Unified Messaging system when the incoming call destination
is the floating extension number of a UM group.
The Service Group number is used to allow the Unified Messaging system to send the applicable greeting
message to the caller.
Value Range
None, 1–64
Feature Guide References
2.1.1.2 Direct In Line (DIL)
3.2.1 System Features—3.2.1.39 Service Group
712 PC Programming Manual