Pbx Configuration-[4-3] Extension-Dss Console - Panasonic kx-ns500 Pc Programming Manual

12.3 PBX Configuration—[4-3] Extension—DSS
Console
A DSS Console can be used in conjunction with a PT. A maximum of 8 DSS Consoles can be programmed.
The DPT Type—Type of the extension port that DSS Console is connected must be set to DSS in 9.22 PBX
Configuration—[1-1] Configuration—Slot—Port Property—Extension Type.
Each flexible DSS button can be customised to access a certain feature. A maximum of 66 flexible DSS buttons
can be customised for each DSS Console.
To copy DSS Console setting values from one location to another, click the Copy to button.
For more information on flexible buttons, see 2.21.2 Flexible Buttons in the Feature Guide.
Once flexible DSS buttons have been programmed, the Terminal Label Print utility can be used to print label
sheets, which can be attached to your DSS Console for quick reference. For details, see 1.2.2.1 Editing and
Printing Terminal Labels in Off-line Mode.
Pair Extension
Specifies the extension number of the PT to be used in pair with the DSS Console. Note that if one or more
SDN buttons have been set at the DSS Console, they must be deleted before this setting can be changed.
Value Range
None, Max. 5 digits (consisting of 0–9)
Type
Specifies the feature to be assigned to the flexible DSS button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND
(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd
(Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Call Log, Log-in/Log-out, Hurry-up,
Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, ISDN Service, CLIR, COLR,
ISDN Hold, Headset, Time Service - Automatic/Manual, Check In, Check Out, Cleaned Up, Two-way Record,
Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, SDN
PC Programming Manual References
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
2.21.2 Flexible Buttons
Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
1–208
12.3 PBX Configuration—[4-3] Extension—DSS Console
PC Programming Manual 635