Utility-Monitor/Trace-Tcp Trace - Panasonic kx-ns500 Pc Programming Manual

7.4.9 Utility—Monitor/Trace—TCP Trace
7.4.9 Utility—Monitor/Trace—TCP Trace
The TCP trace result of LAN port transmission activity can be output to the USB port.
You must log in using the Installer level account to use this feature.
You must access the TCP trace output destination device directly from the Web Maintenance Console when
using this feature. In a One-look network, you cannot access this feature via the Master PBX's Web
Maintenance Console.
TCP trace data is output to a USB memory device connected to the USB port. The TCP trace file is saved
without an extension in the root directory of the USB memory device.
The file name uses the time stamp from when the operation was started, and is "TCP_YYMMDDhhmmssN",
where YY: year, MM: month, DD: day, hh: hour, mm: minute, ss: second, and N: serial number.
If the generated TCP trace file exceeds 30 MB, it is split into separate files of up to 30 MB, as follows:
•
TCP_YYMMDDhhmmss (The first file is not given a serial number.)
•
TCP_YYMMDDhhmmss1
•
TCP_YYMMDDhhmmss2
:
•
TCP_YYMMDDhhmmssN
TCP trace data output stops when the remaining space in the USB memory device reaches 50 MB.
To output LAN port TCP trace data to a USB memory device
1.
Click Start.
2.
Click Stop to end the trace.
128 PC Programming Manual