Pbx Configuration-[3-7-2] Group-Um Group-Unit Settings - Panasonic kx-ns500 Pc Programming Manual

11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit Settings
11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit
Settings
A UM group has a floating extension number, which can be assigned as the destination for redirected calls
and incoming calls.
To assign extension numbers to the group, click Member List. To view a list of all programmed extension
numbers and types, click Extension List View (see 6.5 Tool—Extension List View).
Floating Extension No.
Specifies the floating extension number of the UM group.
Value Range
Max. 5 digits (consisting of 0–9)
PC Programming Manual References
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
Feature Guide References
3.1.1 Unified Messaging System Overview—UM Ports and the UM Group
Group Name
Specifies the name of the UM group, which will be shown on the display of extensions that call the UM group.
Value Range
Max. 20 characters
PC Programming Manual References
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
Feature Guide References
3.1.1 Unified Messaging System Overview—UM Ports and the UM Group
Centralised VM Unit Setting
Floating Extension No. (TIE)
Specifies the floating extension number of the centralised VM (DPT) group. This floating extension number
must start with the number used to access a TIE line or the extensions of another PBX.
Value Range
Max. 8 digits (consisting of 0–9, *, and #)
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Other PBX Extension
536 PC Programming Manual
TIE Line Access