Panasonic kx-ns500 Pc Programming Manual page 466

10.9 PBX Configuration—[2-9] System—System Options
PT Operation—One-touch Busy Override by SCO key
Specifies whether calls in progress can be joined (Executive Busy Override) simply by pressing the S-CO
button.
Value Range
Enable, Disable
Feature Guide References
2.10.2 Executive Busy Override
PT Operation—JOG Dial Speed
Selects the speed at which items scroll on the display when the Jog Dial is used.
Value Range
Normal, High Speed
PT Operation—PT Ring Off Setting
Specifies whether incoming call ringing can be turned off at individual extensions. If disabled, users cannot
prevent incoming calls from ringing.
Value Range
Disable, Enable
Feature Guide References
2.1.3.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is
established automatically when it receives a call from a trunk.
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Feature Guide References
2.4.4 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group Key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
Value Range
Disable (Disconnect), Enable
466 PC Programming Manual