27.2.1 Network Service—[2-1] Server Feature—DHCP
27.2 Network Service—[2] Server Feature
27.2.1 Network Service—[2-1] Server Feature—DHCP
Settings for the DHCP Server can be programmed.
DHCP Server
DHCP Server
Specifies if the DHCP server functions of the PBX are enabled or not.
Value Range
Disable, Enable
Port number
Specifies the port number used for the DHCP server.
Value Range
67, 1024–65535
IP address auto assignment
Starting IP address
Specifies the starting IP address for the assignable range of IP addresses.
Value Range
1.0.0.0–223.255.255.255
Ending IP address
Specifies the ending IP address for the assignable range of IP addresses.
Value Range
1.0.0.0–223.255.255.255
Lease interval (h)
Specifies the duration in hours of the DHCP allocation lease. Setting "0" specifies an unlimited lease duration.
Value Range
1–168 (hours)
Auto assignment exclusions
Up to 16 IP Addresses can be specified that will not be automatically assigned.
Value Range
1.0.0.0–223.255.255.255
856
PC Programming Manual