Panasonic kx-ns500 Pc Programming Manual page 570

12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Value Range
No Line: No line is selected. Select a line by pressing the desired Line Access button to answer a call.
Ringing Line: The longest ringing call is selected.
PDN: The call arriving at any PDN button is selected.
F-1–F-84: The call arriving at a flexible button (F-1–F-84) is selected. A flexible button customised as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
PC Programming Manual References
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
2.4.2 Line Preference—Incoming
Call Waiting Tone Type
Selects the type of Call Waiting tone sent to the busy extension.
Value Range
CW Tone 1, CW Tone 2
Feature Guide References
2.10.4.2 Call Waiting Tone
LCS Recording Mode
Specifies whether to continue or stop recording the message in the extension's mailbox when the extension
user answers a call that was being monitored.
Value Range
Stop Record, Keep Record
Feature Guide References
3.1.1 Unified Messaging System Overview
LCS Answer Mode
Specifies whether the extension's mailbox is monitored in Hands-free or Private mode.
Value Range
Hands free: Monitor through the built-in speaker
Private: Monitor through the handset or the built-in speaker after hearing a warning tone
Feature Guide References
2.11.1 Hands-free Operation
3.1.1 Unified Messaging System Overview
570 PC Programming Manual