Pbx Configuration-[9-2] Private Network-Network Data Transmission - Panasonic kx-ns500 Pc Programming Manual

17.2 PBX Configuration—[9-2] Private Network—Network Data Transmission
17.2 PBX Configuration—[9-2] Private
Network—Network Data Transmission
Settings related to the transmission of extension BLF (Busy Line Field) data or Message Waiting notifications
over a network of PBXs can be programmed.
Extension BLF data is used to show the status of a monitored extension attached to another PBX on a Network
DSS (NDSS) button. Network Message Waiting notifications are used for the Centralised VM feature, and a
voice mail system can send notifications to extensions connected to any PBX in the network.
Network Data Transmission for Centralised Operator Feature—Network PBX ID
Specifies the Network ID of the PBX, for Network Direct Station Selection (NDSS). This parameter must be
set in correspondence with the Network IDs assigned to other PBXs in the network.
Network IDs 1-8 can only be assigned to one PBX each within a network. Assigning the same Network ID to
two PBXs will cause network data transmission problems.
Changing this value in On-line mode will automatically clear any NDSS Link Data.
Value Range
0: The PBX retransmits BLF data sent by other PBXs.
1: The PBX receives BLF data sent by other PBXs.
2–8: The PBX transmits BLF data over the network.
Feature Guide References
4.3.5.1 Network Direct Station Selection (NDSS)
Network Data Transmission for Centralised Operator Feature—Data
Transmission VoIP->ISDN
Selects whether to re-send BLF data received from a VoIP port through any ISDN ports that are set to transmit
BLF data.
Value Range
Disable, Enable
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—ISDN CO—
Transfer
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting—
Data Transfer
Feature Guide References
4.3.5.1 Network Direct Station Selection (NDSS)
Network Data Transmission for Centralised Operator Feature—Data
Transmission ISDN->VoIP
Selects whether to re-send BLF data received from an ISDN port through any VoIP ports that are set to transmit
BLF data.
702 PC Programming Manual
Networking Data
Networking