Incoming Call Queue Monitor - Panasonic kx-ns500 Pc Programming Manual

10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Executive—
Override
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Executive—
Override Deny
Feature Guide References
2.10.2 Executive Busy Override
Not Ready (Manual Wrap-up) Mode On / Off
Specifies the feature number used to enter or leave Not Ready mode.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Feature Guide References
2.2.2.8 Log-in/Log-out
Log-in / Log-out
Specifies the feature number used to join or leave an incoming call distribution group.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Feature Guide References
2.2.2.8 Log-in/Log-out

Incoming Call Queue Monitor

Specifies the feature number, available only for extensions assigned as a supervisor, used to monitor the status
of an incoming call distribution group with the extension display.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual References
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group
Settings—Miscellaneous—
430 PC Programming Manual
Supervisor Extension Number
Executive Busy
Executive Busy