Pbx Configuration-[1-1] Configuration-Slot-Port Property-Extension Type - Panasonic kx-ns500 Pc Programming Manual

9.22 PBX Configuration—[1-1]
Configuration—Slot—Port Property—Extension
Type
Various settings can be programmed for each extension port.
To view the total number of each type of extension connected, click Port Type View.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Note
Other programming items that are displayed on this screen but not listed below are used only when
programming extensions connected to an Expansion Unit.
For information about Expansion Units, see 9.33 PBX Configuration—[1-1]
Configuration—Slot—Expansion Unit1/Expansion Unit2/Expansion Unit3.
Port Type
Indicates the port type (reference only).
Value Range
SLT/DPT/S-Hybrid/S-Hybrid(S-DPT)/S-Hybrid(SLT)/IP-EXT/SIP-MLT/SIP/ISDN/UM
Telephone Type
Indicates the connected telephone type (reference only).
Value Range
APT/DPT/DSS/VM/ISDN-Extension/IP-PT/UT/SIP/SIP-CS/S-PS/CS/CS-M/CS-S1/CS-S2/CS-S3/No
Connection/UNKNOWN
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the PBX.
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
PC Programming Manual 321