Panasonic kx-ns500 Pc Programming Manual page 450

10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Manager
COS Name
Specifies the name of the COS.
Value Range
Max. 20 characters
Feature Guide References
5.1.1 Class of Service (COS)
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Value Range
Disable: An extension cannot set call forwarding for any group.
Enable-All: An extension can set call forwarding for all groups.
Enable-Group: An extension can only set call forwarding for the group to which the extension belongs.
PC Programming Manual References
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—
Feature Guide References
2.3.2 Call Forwarding (FWD)
PT Programming Mode Level
Specifies the level of authorisation for performing PT programming.
Value Range
Disable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG **/*#: A PT user can perform Administrator level and User level programming.
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—
Feature Guide References
5.5.3 PT Programming
450 PC Programming Manual
COS
COS
COS
COS