Panasonic kx-ns500 Pc Programming Manual page 397

Hide thumbs Also See for kx-ns500:
Table of Contents

Advertisement

Feature Guide References
2.6.3 Last Number Redial
Dial—Hot Line (Pickup Dial) Start (s)
Specifies the length of time between going off-hook and the start of automatic dialling when the Hot Line feature
is set.
Value Range
0–180 s
Feature Guide References
2.6.6 Hot Line
Dial—Extension First Digit (s)
Specifies the length of time after going off-hook within which the first digit of a feature number or destination
must be dialled before a reorder tone is heard.
Value Range
1–250 s
Feature Guide References
2.5.2 Automatic Extension Release
Dial—Extension Inter-digit (s)
Specifies the length of time within which subsequent digits must be dialled before the PBX sends a reorder
tone.
Value Range
1–250 s
Feature Guide References
2.5.2 Automatic Extension Release
Dial—Analogue CO First Digit (s)
Specifies the length of time within which the first digit of a telephone number must be sent to an analogue
trunk. If no digit is sent before this time expires, the PBX recognises end of dialling and stops muting the
caller's voice over the analogue trunk.
Value Range
1–15 s
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual
397

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents