Um Configuration-[4-2] Service Settings-Parameters - Panasonic kx-ns500 Pc Programming Manual

Hide thumbs Also See for kx-ns500:
Table of Contents

Advertisement

23.2 UM Configuration—[4-2] Service
Settings—Parameters
Automated Attendant
Wait Time for First Digit (0-20 s)
Specifies the length of time the system waits for the caller to dial a digit before assuming the caller cannot input
a DTMF signal and therefore activates No DTMF Input Call Coverage
Value Range
0–20 s
Menu Repeat Cycle (1-5 times)
Specifies the number of times the system will play the Automated Attendant top menu if the caller does not
make a selection.
Value Range
1–5 times
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Play Owner's Name during Transfer
Determines whether "Transferring you to (name)" is announced to the caller before transferring the caller to
an extension.
Value Range
Enable, Disable
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Operator Service
When operator calls are made, calls are connected to the lowest-numbered operator that is available. To
enable/disable the operator setting for each time mode, check/uncheck it.
Note
The extension assigned as Operator 1 for day mode is automatically designated as the Message
Manager. Because the extension number assigned for Operator Service No. 1 in the Day Mode is for
the Message Manager, you cannot assign this extension to any other mailbox.
Extensions assigned as operators can be called by dialling [0], however, when setting features such
as Message Waiting Notification and Remote Call Forwarding, the extension number (not "0") must be
specified.
Value Range
Operator Service for Day, Operator Service for Night, Operator Service for Lunch, Operator Service for Break
23.2 UM Configuration—[4-2] Service Settings—Parameters
PC Programming Manual
797

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents