Panasonic kx-ns500 Pc Programming Manual page 724

18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table
Value Range
Max. 5 digits (consisting of 0–9)
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Feature Guide References
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Value Range
1–8
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the incoming call destination is the floating
extension number of a VM (DPT) Group. The VM trunk group number is used to allow the VPS to send the
applicable greeting message to the caller.
Value Range
1–48
UM Service Group No.
Specifies the Service Group number sent to the Unified Messaging system when the incoming call destination
is the floating extension number of a UM group.
The Service Group number is used to allow the Unified Messaging system to send the applicable greeting
message to the caller.
Value Range
None, 1–64
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
724 PC Programming Manual