Panasonic kx-ns500 Pc Programming Manual page 694

16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Carrier Access Code
Specifies the carrier access code. The carrier access code can be added to the user-dialled number by
specifying "C" in
Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
TRG Priority
Selects the order in which trunk groups are seized when making calls via each carrier.
Trunk Group—Priority 1–Priority 4
Specifies which trunk group is seized in the order of priority 1 to priority 4.
Value Range
None, 1–64
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
TRG 01–TRG 64
Selects the trunk groups that connect to the carrier.
TRG 01–TRG 64
Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled for use
with that carrier.
Value Range
OFF (white), ON (blue)
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Authorisation Code for Tenant
Specifies an Authorisation code for each tenant. The Authorisation codes can be added to the user-dialled
number by specifying "A" command in
694 PC Programming Manual
Modify Command on this screen.
Modify Command on the Carrier tab.