Panasonic kx-ns500 Pc Programming Manual page 203

Jitter Buffer Delay Init. for FAX
Specifies the initial size of the jitter buffer for fax communications.
Value Range
0–200 ms
Jitter Buffer Adaptation Period for FAX
Specifies the length of time that the jitter buffer is applied for fax communications.
Value Range
1000–65530 ms
DTMF Detection Level for G.711A
Specifies the level of DTMF detection for the G.711A codec.
Value Range
-45– -12 dB
DTMF Detection Level for G.711Mu
Specifies the level of DTMF detection for the G.711Mu codec.
Value Range
-39– -6 dB
CNG Signal Effective Detection Width 1 (ON)
Specifies the length of time that the PBX detects the CNG signal.
Value Range
20–5000 ms
CNG Signal Effective Detection Width 2 (OFF)
Specifies the length of time that the PBX waits until another CNG signal is detected.
Value Range
20–5000 ms
CNG Signal Fixation Detection Counter
Specifies the number of times the CNG signal must be detected before the PBX proceeds the fax operation.
Value Range
1–3
CNG Signal Fixation Detection Pattern
Specifies the CNG signal pattern to be detected before the PBX proceeds the fax operation.
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
PC Programming Manual 203