Panasonic kx-ns500 Pc Programming Manual page 469

PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—
(x10s)
Feature Guide References
2.6.3 Last Number Redial
Redial—Automatic Redial for Analogue CO
Selects whether Automatic Redial to an analogue trunk is performed when the called party does not answer
within a pre-programmed time period.
Value Range
Enable, Disable
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—
(x10s)
Feature Guide References
2.6.3 Last Number Redial
Redial—Save Dial After Connection to Redial Memory
Specifies whether any digits dialled after the called party answers (for example, to access a specific extension
within another company) are also saved as part of the redial number.
Value Range
Enable, Disable
Feature Guide References
2.6.3 Last Number Redial
Redial—Call Log by Redial key
Enables display of the Outgoing Call Log on a display PT by pressing the REDIAL button while on hook.
Value Range
Enable, Disable
Feature Guide References
2.6.3 Last Number Redial
10.9 PBX Configuration—[2-9] System—System Options
Automatic Redial—Redial Call Ring Duration
Automatic Redial—Redial Call Ring Duration
PC Programming Manual 469