Panasonic kx-ns500 Pc Programming Manual page 315

System Speed Dial Download
Specifies if the connected SIP phone will download system speed dial entries from the PBX.
Value Range
Enable, Disable
PC Programming Manual References
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—
Download For UT Extensions
SIP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Value Range
0–63
RTP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Value Range
0–63
UT Codec Priority - 1st—UT Codec Priority - 4th
Specifies the priority of the codecs to be used. None is only available for 2nd, 3rd, and 4th priorities.
Value Range
G.722, G711A, G.729A, G711Mu, None
Packet Sampling Time
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms
Jitter Buffer - Maximum Delay
Specifies the maximum size of the jitter buffer for voice communications.
Value Range
3–50 ms
Jitter Buffer - Minimum Delay
Specifies the minimum size of the jitter buffer for voice communications.
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT
System Speed Dial
PC Programming Manual 315