Panasonic kx-ns500 Pc Programming Manual page 736

19.1 PBX Configuration—[11-1] Maintenance—Main
Value Range
Disable, Enable
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table—
Key Required)
17.2 PBX Configuration—[9-2] Private Network—Network Data Transmission—
Transmission for Centralised VM Feature—Data Re-transmission : Repeat Counter
Feature Guide References
4.3.5.2 Centralised Voice Mail
Error Log for Centralised VM—Network MSW Transmission (Buffer)
Enables error information to be logged in the PBX if the quantity of network message waiting information being
re-transmitted is larger than the transmission buffer.
Value Range
Disable, Enable
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table—
Key Required)
Feature Guide References
4.3.5.2 Centralised Voice Mail
Remote
Remote—Analogue Remote (Modem) Floating Extension Number
Specifies the floating extension number for analogue remote maintenance. To enable this setting, an RMT
card must be installed, and
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
5.5.2 PC Programming
Remote—ISDN Remote Floating Extension Number
Specifies the floating extension number for ISDN remote maintenance. To enable this setting,
Remote—Remote Programming on this screen must be enabled.
Value Range
Max. 5 digits (consisting of 0–9)
736 PC Programming Manual
Remote—Remote Programming on this screen must be enabled.
Enhanced QSIG Call Information (Activation
Network MSW Data
Enhanced QSIG Call Information (Activation