Network Service-[2-6] Server Feature-Smtp - Panasonic kx-ns500 Pc Programming Manual

27.2.5 Network Service—[2-6] Server Feature—SMTP
Settings for SMTP for sending e-mail for PBX functions can be programmed.
Mail sending—Mail sender information name
Specifies the name to be used as the sender of the e-mails from the PBX.
Value Range
Max. 64 characters
Mail sending—Mail address
Specifies the sending e-mail address for messages sent from the PBX. This address, for example, could be
set as the e-mail address of an administrator.
Value Range
Max. 128 characters
SMTP server for relay—SMTP server address—IP Address
Specifies the IP address of the SMTP server to be used to send e-mails.
Value Range
1.0.0.0–223.255.255.255
SMTP server for relay—SMTP server address—Name
Specifies the host name of the SMTP server to be used to send e-mails.
Value Range
Max. 128 characters
SMTP server for relay—SMTP server Port number
Specifies the port number of the SMTP server to be used to send e-mails.
Value Range
25, 465, 587, 1024–65535
SMTP server for relay—SMTP over TLS
Specifies whether the SMTP server uses Transport Layer Security.
Value Range
Enable, Disable
Note
When Enable is selected, the encryption method used is STARTTLS.
27.2.5 Network Service—[2-6] Server Feature—SMTP
PC Programming Manual 861