System Control-Program Update-Plug And Update - Panasonic kx-ns500 Pc Programming Manual

5.1.3 System Control—Program Update—Plug and Update
5.1.3 System Control—Program Update—Plug and Update
The Plug and Update feature allows IP-PTs, IP-CSs, and certain PSs to be automatically updated to the latest
software version when they are registered to the PBX. When Plug and Update is enabled, the version number
of the system software stored on the Main unit is compared to the system software currently in the device, after
the device has been registered to the PBX. If the software on the Main unit is newer, it is downloaded to the
device. By default, Plug and Update is set to Off for all device types.
1.
For each device type, select On for the features you want to enable.
•
Plug & Update for IP-PT/IP-CS: Enable Plug and Update for IP-PTs and IP-CSs.
•
Plug & Update for TCAx85: Enable Plug and Update for supported PSs.
•
Manual Update for TCAx85: Enable manual updates for supported PSs.
2.
Click OK.
Note
•
Plug & Update for TCAx85 and Manual Update for TCAx85 cannot be set to enable at the same
time.
•
The following PSs support this feature:
•
KX-TCA185
•
KX-TCA285
•
KX-TCA385
70 PC Programming Manual