Panasonic kx-ns500 Pc Programming Manual page 801

Changing the order of Alternate Extensions
Select an extension and click Move up or Move down to change its order in the list. Alternate extensions will
be dialled in order from top to bottom.
Note
Extension Groups and Logical Extensions cannot be assigned.
Value Range
Max. 32 extensions (max. 5 digits per extension)
PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—
Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;])
Feature Guide References
3.2.1.3 Automated Attendant (AA)
List All Names
If set to "Enable", callers can listen to all subscriber names and extension numbers in the Automated
Attendant service or Custom Service.
Value Range
Enable, Disable
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Operator Transfer Mode
Specifies the timing of the operator transfer.
Value Range
Transfer immediately, Do not transfer immediately
Feature Guide References
3.2.1.3 Automated Attendant (AA)
No DTMF Input Operation
No DTMF Input Call Coverage for Day, Night, Lunch, and Break (Selection)
Specifies where a caller will be transferred when there is no DTMF input in response to system guidance (for
example, the caller is using a rotary phone) for each time mode.
Value Range
G.D.M.: The caller is transferred to the General Delivery Mailbox.
Operator: The caller is transferred to an operator.
23.2 UM Configuration—[4-2] Service Settings—Parameters
PBX Environment—Alternate Extension
PC Programming Manual 801