Panasonic kx-ns500 Pc Programming Manual page 337

Value Range
0–600 ´ 100 ms
ISDN Extension—T203
Specifies the length of time to detect no communication status of L2.
Value Range
0–600 ´ 100 ms
ISDN Extension—T301
Specifies the maximum time that the PBX waits for a reply after making a call to ISDN.
Value Range
0–18000 ´ 100 ms
ISDN Extension—T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap receiving.
Value Range
0–600 ´ 100 ms
ISDN Extension—T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting) message to
ISDN.
Value Range
0–600 ´ 100 ms
ISDN Extension—T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to overlap sending.
Value Range
0–3000 ´ 100 ms
ISDN Extension—T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC (disconnection) message
to ISDN.
Value Range
0–3000 ´ 100 ms
9.25 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
PC Programming Manual 337