Programming Manual References
None
Feature Manual References
3.1.3 Caller ID
SLT MW Mode (KX-TDE series only)
Enables the use of the Message Waiting Lamp on an SLT extension connected to the extension port.
Default
Disable
Value Range
Disable, MW-Lamp
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
11.1.3 Message Waiting
Wrap-up Timer
Specifies the length of time that must pass after completing a call before an extension will accept another call
when logged in as a member of an Incoming Call Distribution Group.
This timer is used when "
Incoming Call Distribution Group—Miscellaneous.
Default
0 s
Value Range
0–3000 s
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List—
5.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous—
Document Version 2011-10
Options—Wrap-up Timer based on" is set to "Extension" in 5.15 [3-5-3]
6.1 [4-1-1] Wired Extension—Extension Settings
Wrap-up Timer
Options—Wrap-up Timer based on
PC Programming Manual
633