Panasonic kx-ns500 Pc Programming Manual page 260

9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
Value Range
00–FF
RTCP Packet Sending Ability
Specifies whether to enable each port to send RTCP packets.
Value Range
Disable, Enable
RTCP Packet Interval
Specifies the interval time until the next RTCP packet is sent.
Value Range
5–60 s
Keep Alive Timer
Specifies the length of time to send Keep Alive packets for the connection. Specifying "0 s" will disable the
sending of Keep Alive packets.
Value Range
0 s, 10 s, 20 s, 30 s, 40 s, 50 s, 60 s
T.38
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Value Range
272–512
T38 FAX UDPTL Error Correction – Redundancy
Specifies whether to enable the redundancy feature when using the T.38 protocol.
260 PC Programming Manual