Panasonic kx-ns500 Pc Programming Manual page 575

Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
Option 8
Extension Number
Specifies the extension number of the extension.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension at the
moment that the extension goes on-hook for the previous call.
Value Range
Disable, Enable
Extension Caller ID Sending
Enables the extension to send Caller ID information.
Note
This setting is available only when
SLT/S-Hybrid/S-Hybrid(S-DPT)/S-Hybrid(SLT)
Value Range
Disable, Enable
Feature Guide References
2.19.1 Caller ID
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time that the ringing for a call is delayed when the call follows immediately after the
previous unanswered call. When receiving two calls in quick succession (e.g., when a call waiting in a queue
is directed to an extension immediately after the previous unanswered call stops ringing), some SLTs require
a pause, after the first call stops ringing, to receive the second call's Caller ID information.
Note
This setting is available only when
SLT/S-Hybrid/S-Hybrid(S-DPT)/S-Hybrid(SLT)
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Port Type is set to one of the following.
Port Type is set to one of the following.
PC Programming Manual 575