Panasonic kx-ns500 Pc Programming Manual page 242

9.8 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-SIPGW
Value Range
0–1600 ms
SIP Called Party Number Check Ability
Specifies whether to receive a SIP trunk call when receiving the INVITE message with an incorrect target
SIP-URI. The setting specified here is also applied when the request header is blank or contains characters
that cannot be modified to a receivable number.
Value Range
Disable (High->Low), Disable (Low->High), Enable
SIP Called Party Number Search Mode
Specifies the search mode for the notified SIP Called Party Number information.
Value Range
Mode 1: Searches SIP accounts only.
Mode 2: Searches SIP accounts, then DDI/DID numbers. Searches the SIP trunks of the tenant of the
search-matched DDI/DID number, in ascending order (Low ® High).
Mode 3: Searches SIP accounts, then DDI/DID numbers. Searches the SIP trunks of the tenant of the
search-matched DDI/DID number, in descending order (High ® Low).
Symmetric Response Routing Ability
Enables this feature to request that the SIP server sends the response back to the source IP address and port
from which the request originated.
Value Range
Disable, Enable
100rel Ability
Specifies whether to add the option tag 100rel to the header field of the INVITE message.
Value Range
Disable: This feature is not activated.
Enable (Active): Activates this feature only if the other device supports the feature.
Enable (Passive): Activates this feature only when requested by the other device.
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
SIP QoS Ability
Specifies the type of value to be stored in the ToS field in the IP header.
242 PC Programming Manual