Panasonic kx-ns500 Pc Programming Manual page 324

9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
DPT Type—Air Sync Group No
Assigns an Air Synchronisation Group number to the CS. This setting is only available when DPT
Type—Type on this screen is set to Normal.
Value Range
None, 1
PC Programming Manual References
19.3.1 PBX Configuration—[11-3-1] Maintenance—CS Synchronisation—Air Synchronisation
Headset OFF/ON
Turns on or off the use of a headset with a DPT. This setting is only available when Port Type on this screen
is set to DPT, DPT(S-DPT), S-Hybrid, or S-Hybrid(S-DPT).
Value Range
Headset OFF, Headset ON
Feature Guide References
2.11.4 Headset Operation
C.Waiting with Headset
Selects the Call Waiting tone generating device when using a headset. This setting is only available when Port
Type on this screen is set to DPT, DPT(S-DPT), S-Hybrid, or S-Hybrid(S-DPT). This setting is displayed when
"Headset ON" is selected for Headset OFF/ON.
Value Range
PT Tone, Headset
Ringing Tone
Selects the dual-tone switching pattern of the ring tone for incoming calls when Port Type on this screen is set
to DPT, DPT(S-DPT), S-Hybrid, S-Hybrid(SLT), or S-Hybrid(S-DPT). This setting is not available for the APTs,
or SLTs.
Value Range
A: 64 ms (697 Hz), 64 ms (852 Hz)
B: 32 ms (697 Hz), 32 ms (852 Hz)
C: 128 ms (697 Hz), 128 ms (852 Hz)
D: 32 ms (697 Hz), 96 ms (852 Hz)
324 PC Programming Manual