Panasonic kx-ns500 Pc Programming Manual page 481

3rd Party CTI—CDR retry interval timer
Specifies the length of time until the alive check of CDR is retried when no response is received, for Third Party
Call Control CTI.
Value Range
0–60 s
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
3rd Party CTI—CDR retry counter
Specifies the number of times that the alive check of CDR is repeated for Third Party Call Control CTI. When
the alive check has been attempted the programmed number times, the association is released automatically.
Value Range
0–10
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
CTI Make Call—SLT Ring
Specifies whether to ring an SLT when a call is made from CTI, instead of the SLT.
Value Range
Enable, Disable
CTI Hold—Forced Idle when Hold by PDN/SDN Key
Selects whether to force an extension to become idle while having a call held on a PDN/SDN button.
Value Range
Enable, Disable
Feature Guide References
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Option 7
Incoming Call Log—Busy/Intercept (when Called Party is Busy)
Specifies whether the following types of calls are recorded in the incoming call log of the original destination.
•
Calls received when the extension is busy.
•
Calls rerouted via the Intercept Routing—Busy feature.
If this setting is enabled, calls are recorded as "Not Answered".
Value Range
Enable (Not Answered), Disable
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual 481