Panasonic kx-ns500 Pc Programming Manual page 474

10.9 PBX Configuration—[2-9] System—System Options
If set to "Disable", echo cancelling is not used for extension-to-ISDN line calls.
Value Range
Disable, Enable
Option 4
DSS Key—DSS key mode for Incoming Call
Enables the use of a DSS button to pick up an incoming call to another extension or an ICD group.
Value Range
On or Flash, Off
Feature Guide References
2.4.3 Call Pickup
2.21.3 LED Indication
DSS Key—Call Pick-up by DSS key for Direct Incoming Call
Specifies whether a DSS button will light up or flash when a call rings at the specified extension. To enable
this setting, DSS Key—DSS key mode for Incoming Call on this screen must be set to "ON or Flash".
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Feature Guide References
2.4.3 Call Pickup
DSS Key—Call Pick-up by DSS key for ICD Group Call
Specifies whether a DSS button will light up or flash when a call rings at the specified incoming call distribution
group.
To enable this setting,
Flash".
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Feature Guide References
2.4.3 Call Pickup
DSS Key—Automatic Transfer for Extension Call
Specifies whether pressing a DSS or SDN button during an extension-to-extension call disconnects the current
call or places the call on consultation hold.
474 PC Programming Manual
DSS Key—DSS key mode for Incoming Call on this screen must be set to "ON or