Panasonic kx-ns500 Pc Programming Manual page 24

1.2.1 Starting Web Maintenance Console
1.
Connect the PC to the PBX.
•
Install the Remote card, connect the PBX to an analogue line, and access the PBX from a PC via a
remote modem.
•
Connect the PBX to an ISDN line and access the PBX from a PC via an ISDN modem.
For more details, refer to "5.2 PC Connection—Connection via RMT Card (KX-TDA0196)" or "5.2 PC
Connection—Connection via PRI23 Card (KX-NS5290), PRI30/E1 Card (KX-NS5290CE), BRI2 Card
(KX-NS5282), or BRI4 Card (KX-NS5284)" in the Installation Manual.
2.
Start the Off-line Web Maintenance launcher :
Analogue Line connection:
1) Click the Connect-Online Mode button.
2) Select the Modem tab.
3) Set the following:
– Dial Number / Dial Type / Port / Baud Rate (bps) / Flow Control / Command
4) Enter the Password.
5) Click the Connect button.
ISDN Line connection:
1) Click the Connect-Online Mode button.
2) Select the ISDN Remote tab.
3) Enter the Telephone Number.
4) Enter the Password.
5) Click the Connect button.
3.
The Web Maintenance Console login screen is displayed. For details about logging in, see 2.1.3 Logging
in to Web Maintenance Console.
4.
After you successfully log in to Web Maintenance Console, the Home screen will be displayed and
programming can be performed. For details about accessing the different features of Web Maintenance
Console, see 3.1 Home Screen.
Connecting to Web Maintenance Console (Off-line Mode)
To connect to Web Maintenance Console in Off-line mode, use the New -Offline Mode or Open -Offline
Mode operations in the Off-line Web Maintenance Console programme launcher. For details, refer to 1.2.2 PC
Programming Using Off-line Mode.
24 PC Programming Manual