User Group - Panasonic kx-ns500 Pc Programming Manual

Telephone Type
Indicates the type of telephone connected to the extension port (reference only).
Value Range
DPT (15V)/DPT (40V): DPT is connected.
APT (15V): APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
ISDN-Extension: ISDN telephone is connected.
CS: CS is connected.
IP-PT: IP-PT belonging to the V-IPEXT card is connected.
P-SIP: Panasonic SIP Phone is connected.
UT: KX-UT series SIP phone is connected.
SIP: General SIP Extension is connected.
S-PS: SIP Portable Station is connected.
SIP-CS: SIP Cell Station is connected.
CS-M: High-density CS is connected with its master port.
CS-S1–3: High-density CS is connected with its slave port.
No Connection: No telephone is connected.
UNKNOWN: SLT is connected (or no telephone is connected to the Super Hybrid or SLT port).

User Group

Specifies the extension user group to which the extension belongs. Extension user groups are used to compose
tenants, call pickup groups and paging groups.
Value Range
1–32
Feature Guide References
5.1.2 Group
5.1.3 Tenant Service
COS
Specifies the COS of the extension.
Value Range
1–64
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
Feature Guide References
5.1.1 Class of Service (COS)
Extension PIN
Specifies the PIN of the extension.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual 559