Panasonic kx-ns500 Pc Programming Manual page 273

Value Range
0–600 ´ 100 ms
T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting) message.
Value Range
0–600 ´ 100 ms
T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to overlap sending.
Value Range
0–3000 ´ 100 ms
T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC (disconnection) message.
Value Range
0–3000 ´ 100 ms
T308
Specifies the maximum time that the PBX waits for a reply after receiving the Release message.
Value Range
0–600 ´ 100 ms
T309
Specifies the length of time after which the PBX tries to disconnect the data link, before disconnecting the call.
Value Range
0–3000 ´ 100 ms
T310
Specifies the maximum time that the PBX waits for a continuance message after receiving the Incoming Call
Proceeding message.
Value Range
0–3000 ´ 100 ms
T313
Specifies the maximum time that the PBX waits for a reply after sending the Connect message.
9.11 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW
PC Programming Manual 273