Panasonic kx-ns500 Pc Programming Manual page 470

10.9 PBX Configuration—[2-9] System—System Options
Extension - CO Call Limitation—For Incoming Call
Selects whether the time limit for extension-to-trunk calls applies to outgoing calls only or for both outgoing
and incoming calls. COS determines the use of this feature, and the length of the time limit can be assigned
on a trunk group basis.
Value Range
Enable, Disable
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—CO & SMDR—
Line Call Duration Limit
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—
Time (*60s)
Feature Guide References
2.11.8 Trunk Call Limitation
CO - CO Call Limitation—After Conference
Selects whether to allow a call between 2 outside destinations to continue after the originator of the conference
has left the conference.
Value Range
Enable: The call will be disconnected.
Disable: The call will continue.
Feature Guide References
2.14.2 Conference
4.3.5 QSIG Enhanced Features
Applying logical partitioning
Selects whether to use the logical partitioning feature.
Value Range
Disable, Enable
PC Programming Manual References
7.3.5 Utility—Log—Call Control Log
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site—Main—
partition
Option 3
Confirmation Tone—Tone 1 : Called by Voice
Enables the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a PT when it receives a call
in voice-calling mode.
470 PC Programming Manual
Extension-CO
Extension-CO Duration
Area ID for logical