Dtmf Integration; Slt Hold Mode; Conference Tone; External Pager Access Tone - Panasonic KX-TA824 Programming Manual

[103] DTMF Integration

Enables Inband (DTMF) Integration between the VPS and the PBX when a KX-TVS series VPS/KX-TVA
series VPS is connected to the PBX. The VPS and PBX communicate with each other by sending DTMF
signals.
1 0 3
Conditions
• In order to select "Enable" in this program, [130] VM 1 APT Port and [131] VM 2 APT Port should
first be set to "Disable".
• Please refer to 1.1.121 Voice Mail Inband (DTMF) Integration in the Feature Manual for details
about such as DTMF status signals.
Programming Manual References
[102] DTMF Integration Port
Feature Manual References
1.1.121 Voice Mail Inband (DTMF) Integration

[104] SLT Hold Mode

Selects how calls are held and transferred with an SLT when the Recall/hookswitch is pressed for less than
1000 ms.
1 0 4
Feature Manual References
1.1.15 Call Hold

[105] Conference Tone

Enables the PBX to send a confirmation tone before starting or ending a conference call established by the
Conference feature or Executive Busy Override feature.
1 0 5
Feature Manual References
1.1.33 Conference
1.1.50 Executive Busy Override—Extension
1.1.51 Executive Busy Override—Outside (CO) Line

[106] External Pager Access Tone

Enables the PBX to send a confirmation tone to the external pager before a paging announcement.
1 0 6
NEXT SELECT STORE
(Enable/ Disable)
NEXT SELECT STORE
( Hold-1/Hold-2/
Hold-3)
NEXT SELECT STORE
( Enable/Disable)
NEXT SELECT STORE
( Enable/Disable)
2.2 PT Programming—Procedures
END
END
END
END
Programming Manual 25