Pbx Configuration-[1-1] Configuration-Slot-Voip Property; Pbx Configuration-[1-1] Configuration-Slot-Voip Property-Voip (Ext) Setting - Panasonic kx-ns500 Pc Programming Manual

9.4 PBX Configuration—[1-1]
Configuration—Slot—VoIP Property
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP
Property—VoIP (Ext) Setting
Allows you to install or remove IP extension cards by entering the number of IP extensions (IP-PT, UT/UDT
or SIP extension) and to set IP Terminal Registration Mode.
When you place the mouse cursor over the VoIP Property button on the Slot screen, click the VoIP(Ext)
Setting button to open the VoIP(Ext) Setting screen.
Number of IP Extensions—Number of IP Extensions—IP-PT(NT)
Specifies the required number of IP-PT(NT) extensions to install or remove V-IPEXT32 cards.
Value Range
0–128
Number of IP Extensions—Number of IP Extensions—UT/UDT
Specifies the required number of UT/UDT extensions to install or remove V-UTEXT32 cards.
Value Range
0–128
Number of IP Extensions—Number of IP Extensions—SIP-Phone
Specifies the required number of SIP extensions to install or remove V-SIPEXT32 cards.
Value Range
0–128
Number of IP Extensions—Number of IP Extensions—Total
Indicates the total number of required IP Extensions (IP-PT(NT), UT/UDT, SIP Phone) (reference only).
Value Range
0–128
Number of IP Extensions—Number of cards—V-IPEXT32
Indicates the number of installed V-IPEXT32 cards (reference only).
Value Range
0–4
Number of IP Extensions—Number of cards—V-UTEXT32
Indicates the number of installed V-UTEXT32 cards (reference only).
9.4.1 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Ext) Setting
PC Programming Manual 231