Panasonic kx-ns500 Pc Programming Manual page 255

Number Format
Selects the format of the CLIP number to be sent to the called party.
Value Range
International, +International, National
Remove Digit
Specifies the number of leading digits of the CLIP number to be removed. This setting is compulsory when
PBX-CLIP is selected in From Header—User Part or P-Preferred-Identity Header—User Part.
Value Range
0–32
Additional Dial
Specifies the number to be added to the CLIP number in the place of the removed digits. This setting is
compulsory when PBX-CLIP is selected in From Header—User Part or P-Preferred-Identity Header—User
Part.
Value Range
Max. 20 digits (consisting of 0–9, *, and #)
Anonymous format in "From" header
Specifies the format of the "From" header when not sending caller ID.
Value Range
Display name and SIP-URI, Display name only
Note
If "Display name and SIP-URI" is selected, the display name part and the SIP-URI of the "From" header
will be displayed as "Anonymous".
[Example]
From: Anonymous <sip:anonymous@anonymous.invalid>
If "Display name only" is selected, only the display name part of the "From" header will be displayed as
"Anonymous".
[Example]
From: Anonymous <sip:1234@example.com>
P-Asserted-Identity header
Select whether to include a P-Asserted-Identity header with caller information. This header will be sent
independent of the selection for
Value Range
Disable, Enable
Note
•
To copy values from one location to another, click Copy to.
•
If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
Header Type (From Header/P-Preferred-Identity Header).
PC Programming Manual 255