Pbx Configuration-[1-1] Configuration-Slot-Port Property-Port Type View - Panasonic kx-ns500 Pc Programming Manual

9.7 PBX Configuration—[1-1]
Configuration—Slot—Port Property—Port Type View
Displays the number of connected telephones, devices, and Cell Stations (CSs). This screen can be accessed
from the Port Property screen of any extension cards in use in the PBX system, including extension cards of
Expansion Units. For information about Expansion Units, see 9.33 PBX Configuration—[1-1]
Configuration—Slot—Expansion Unit1/Expansion Unit2/Expansion Unit3.
This screen can be accessed only in On-line mode.
Type
Indicates the types of telephones, devices, or CSs (reference only).
Value Range
IP-EXT, SIP-MLT, SIP, DPT (40V) (KX-DT300 series/KX-DT500 series/KX-T7600 series DPTs), DPT (15V)
(DPTs other than KX-DT300 series/KX-DT500 series/KX-T7600 series), APT (15V), SLT, DSS Console, UM,
VM, Other, CS, High-density CS, IP-CS, SIP-CS, S-PS
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Total Count
Indicates the total number of each type of telephone, device, and CS connected to the PBX (reference only).
CSs are counted on the basis of the number of ports in service plus the number of extension ports to which
CSs are connected.
Value Range
Not applicable.
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
9.7 PBX Configuration—[1-1] Configuration—Slot—Port Property—Port Type View
PC Programming Manual 239