27.1 Network Service—[1] IP Address/Ports
DSP IP Setting—DSP Card-1/DSP Card-2—IP Address
Specifies the IP address of the DSP card. This parameter is only available for entering values when Use the
following DSP IP address is selected.
Value Range
1.0.0.1–223.255.255.254
DSP IP Setting—DSP Card-1/DSP Card-2—MAC Address
Indicates the MAC address of the DSP card (reference only).
Value Range
00:00:00:00:00:00–FF:FF:FF:FF:FF:FF
Advanced Settings
LAN Port—Speed & Duplex
Specifies the connection mode of the main port. The connection is made in 100Mbps/half duplex when Auto
negotiation fails.
Value Range
Auto: Automatic mode selection
100M-Full: 100 Mbps/full duplex
100M-Half: 100 Mbps/half duplex
10M-Full: 10 Mbps/full duplex
10M-Half: 10 Mbps/half duplex
LAN Port—MDI/MDIX
Specifies the cable type connected to the LAN port.
Value Range
Auto, MDI, MDIX
Reference
The items displayed in this tab are the settings obtained from a DHCP server by the DHCP client of the PBX.
They are for reference only.
Assigned IP Address—IP Address
Indicates the assigned IP address of the mother board (reference only).
Assigned IP Address—MAC Address
Indicates the MAC address of the mother board (reference only).
Assigned IP Address—Subnet Mask
Indicates the network mask address of the mother board (reference only).
854
PC Programming Manual