Panasonic kx-ns500 Pc Programming Manual page 197

Value Range
0–7
T38 FAX UDPTL Redundancy count for data
Specifies the redundancy count for data when using the T.38 protocol.
Value Range
0–3
T38 FAX Rate Management Method
Specifies the rate management method when using the T.38 protocol.
Value Range
Transferred TCF, Local TCF
V-IPGW–DN2IP
Leading Number
Specifies the leading digits in dialled numbers by which to associate calls with the appropriate destination.
Value Range
Max. 30 digits (consisting of 0–9)
Remaining Number of Digits
Specifies the number of digits to be dialled following the leading number to access the destination.
Value Range
0–29
GW No./GW Group Selection
Specifies the type of destination when making calls: a gateway device or a gateway group.
Value Range
GW Group, GW No.
GW Group
Specifies the number of the destination gateway group. This setting is only available when GW No./GW Group
Selection on this screen is set to GW Group.
Value Range
1–256
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
PC Programming Manual 197