Panasonic kx-ns500 Pc Programming Manual page 201

SIP over TCP/IP (V-SIPGW) *)
Specifies whether or not to use SIP over TCP/IP protocol for the site. When this setting is enabled, SIP trunks
cannot use the UDP/IP protocol.
Note
If this setting is changed, the V-IPGW cards and/or V-SIPGW cards installed at the site will be deleted.
Value Range
Disable, Enable
VoIP-DSP Options
The settings in this tab relate to IP extensions and IP trunks.
IP Extension Count of BGM
Specifies how many IP-PTs connected to the mother board can send out BGM.
Value Range
0–117
Feature Guide References
2.30.1 Background Music (BGM)
Echo Cancellation Ports
Specifies the number of ports to be used for echo cancellation.
Value Range
0–64
Send Music On Hold to IP trunk (for P2P conversation)
Enables the sending of hold music to an IP trunk during a P2P connection call between an IP extension and
IP trunk.
Value Range
Disable, Enable
Jitter Compensation Operation for G.711
Enables the use of a jitter buffer feature for voice communications using the G.711 codec.
Value Range
Disable, Enable
P2P Group Jitter Compensation Operation for G.711 FAX
Enables the use of a jitter buffer feature for fax communications using the G.711 codec.
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
PC Programming Manual 201