Pbx Configuration-[1-1] Configuration-Slot-System Property - Panasonic KX-NS1000 Pc Programming Manual

9.4 PBX Configuration—[1-1]
Configuration—Slot—System Property
The properties of the PBX system can be specified.
Main
DSP CODEC G.711 only (SIP extension)
Specifies whether or not to only use the G.711 codec for SIP extension calls.
Value Range
Enable, Disable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
DSP CODEC G.711 only (IP-GW)
Specifies whether or not to only use the G.711 codec for IP trunk calls.
Value Range
Enable, Disable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
DSP CODEC Priority-1 value only (others)
Specifies whether or not to only use the priority 1 codec set for the following types of calls:
•
IP extension calls
•
SIP trunk calls
Value Range
Enable, Disable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
System Speed Dial Download For UT Extensions
Specifies the maximum number of system speed dial entries that will be downloaded to KX-UT series SIP
phones.
Value Range
0–300
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
PC Programming Manual 187