9.4 PBX Configuration—[1-1]
Configuration—Slot—System Property
The properties of the PBX system can be specified.
Main
DSP CODEC G.711 only (SIP extension)
Specifies whether or not to only use the G.711 codec for SIP extension calls.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
DSP CODEC G.711 only (IP-GW)
Specifies whether or not to only use the G.711 codec for IP CO line calls.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
DSP CODEC Priority-1 value only (others)
Specifies whether or not to only use the priority 1 codec set for the following types of calls:
•
IP extension calls
•
SIP CO line calls
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Document Version 2016-03
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
PC Programming Manual
217