Hybrid Ip-Pbx Configuration - Panasonic KX-TDA15 Installation Manual

3.3 Installation of the KX-TDA15 Maintenance Console
3.3.3

Hybrid IP-PBX Configuration

This section briefly describes how to check the configuration of the Hybrid IP-PBX using the
KX-TDA15 Maintenance Console when PC and the Hybrid IP-PBX are connected by USB
cable.
For detailed descriptions of each feature and related PT programming, refer to the on-line help
at each screen.
134 Installation Manual
1. Start the KX-TDA15 Maintenance Console
(refer to "Starting the KX-TDA15
Maintenance Console and Assigning the
Basic Items (Quick Setup)" in "3.3.1 Installing
and Starting the KX-TDA15 Maintenance
Console").
2. To check the slot condition of the Hybrid IP-
PBX:
a.
Double-click "Configuration".
b.
Double-click "Slot".
3. To check the PS status:
a.
Double-click "Configuration".
b.
Double-click "Portable Station".
4. To check other configurations, double-click
the other items in the same manner.