Applied Biosystems 7900HT User Manual page 99

Copying and
Applying Markers
'PDAR CYP 2C9*2'
added to selected
wells of the plate
document
Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide
Once you copy a marker to the plate document, it is no longer linked to
IMPORTANT!
the corresponding entry in the Marker Manager. Consequently, if you modify a marker
using the Marker Manager after you have copied it to a plate document, you must
remove the marker and copy it again to update the plate document with the changes.
1. In the Marker Manager dialog box of the SDS software, copy the allelic
discrimination marker to the plate document:
a. While pressing and holding Ctrl, select the marker(s) you want to apply to
the plate document.
b. Click
c. In the Copy Markers To Plate dialog box, click
d. Repeat steps a and c to copy additional markers to the allelic
discrimination plate document as needed.
2. Click to close the Marker Manager dialog box.
3. Select the wells containing the assays for a marker you configured in the
previous procedure.
For easier selection of plate grid wells, use the Ctrl and Shift keys to
Note:
select wells individually or in groups. See
4. In the well inspector, click the Use check box of the marker you want to add to
the selected wells.
The detectors associated with the marker are automatically applied to the
Note:
selected wells when the marker is placed in Use.
5. If necessary, repeat
plate document.
6. Configure the plate document with detector tasks as explained in
"Step 3 – Configuring the Plate Document with Tasks" on page
Step 2 – Applying Detectors and Markers
to copy the markers to the plate document.
page 2-23
steps 3 through 4 to assign any remaining markers to the
DRAFT
September 1, 2004 11:39 am, CH_Run.fm
.
Markers copied to
the plate document
for more information.
Detectors for the
'PDAR CYP 2C9*2'
marker
Use check box for
'PDAR CYP 2C9*2'
(selected)
3-16.
3-15