Applied Biosystems 7900HT User Manual page 123

'Snap-On'
Compression Pad
(for automated runs)
Optical adhesive
cover
Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide
a. Load the plate onto a designated thermal cycler and perform the PCR.
b. Briefly centrifuge the plate to draw the reactions to the bottom of the wells and
to eliminate any air bubbles that may have formed during thermal cycling.
c. Run the plate as explained in
Figure 4-3 96-Well Optical Reaction Plate Assembly
Figure 4-4 384-Well Optical Reaction Plate Assembly
"Running the Plate" on page
OR
Optical adhesive
cover
384-well
plate
DRAFT
September 1, 2004 11:39 am, CH_Basic.fm
Preparing Optical Plates for Use
4-25.
Standard compression
pad (for single-plate
runs)
Optical Caps
(flat caps only)
4-9