Compatible Consumables - Applied Biosystems 7900HT User Manual

Compatible Consumables

Consumables for
Use with the
7900HT
Instrument
Compression
Pads for the
ABI P
RISM
96-Well Optical
Reaction Plates
Consumable
Requirements
Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide
The interchangeable sample block modules of the 7900HT instrument allow it to
support a variety of consumable formats listed in
Table 1-1 Compatible Consumables
Consumable
ABI P ™ 384-Well Optical
RISM
Reaction Plates
ABI P ™ 96-Well Optical
RISM
Reaction Plates
Optical 96-Well Fast Thermal
Cycling Plates
TaqMan ® Low Density Arrays
To ensure optimal heat transfer, Applied Biosystems recommends using compression
pads when running the ABI P
If you are going to run the plate:
• Individually using the SDS software, then apply a standard compression pad
• As part of a batch using the Automation Controller Software, then apply an
ABI P Snap-On Compression Pad
RISM
The ABI P
IMPORTANT!
be hot after the Zymark
output stack. Please wait at least 30 seconds before manually handling the Snap-On
Compression Pad/plate assembly.
Performance of the Optical 96-Well Fast Thermal Cycling Plates with
IMPORTANT!
the Zymark Twister Microplate Handler has not been verified. Therefore, when
running multiple Optical 96-Well Fast Plates on the 7900HT instrument, Applied
Biosystems recommends that you load and unload the plates manually.
See Appendix C, "Kits, Reagents, and Consumables,"
consumables, requirements, and purchasing instructions.
• ABI P
RISM
(quantity 100)
• Optical Adhesive Covers (quantity 25)
• Compression Pads:
– Standard pad for manual operation
– ABI P
RISM
(reusable)
• 96-Well Plate Seals:
– ABI P
RISM
(quantity 100)
– Optical Adhesive Covers (quantity 25)
– ABI P
RISM
• ABI P
RISM
(quantity 100)
• Optical Adhesive Covers (quantity 25)
None (self sealing)
96-Well Optical Reaction Plates.
RISM
™ Snap-On Compression Pad/plate assembly may still
RISM
® Twister Microplate Handler loads it into the Plate Handler's
September 1, 2004 11:38 am, CH_Overview.fm

Compatible Consumables

Table 1-1.
Compatible Seals
™ Optical Adhesive Covers
™ Snap-On Compression Pad
Optical Adhesive Covers
™
™ Optical Caps (flat caps only)
™ Optical Adhesive Covers
for a list of available
DRAFT
1-9