Chapter 2 Getting Started
Exercise 3:
Maximizing/
Minimizing
Panes, Views,
and Plots
Sizing button
2-22
Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide
September 1, 2004 11:38 am, CH_GetStart.fm
You can maximize the panes, views, and plots of plate documents by clicking the
sizing buttons embedded inside the grey dividing lines.
Sizing buttons are the arrowhead marks (
Note:
elements of the plate document. When clicked, a sizing button hides the element to
which it points.
1. Click
(down-arrow sizing button) in the divider between the plate grid and the
table pane to maximize the plate grid vertically.
The software maximizes the plate grid by minimizing the table pane.
2. Click and drag the grey divider at the bottom of the plate document to restore the
table pane to its original size (using the action described in Exercise 1).
3. Using the sizing buttons, maximize/minimize other elements of the plate
document until you are comfortable using the feature.
DRAFT
) that appear between adjacent