D-Link DGS-3200 SERIES Cli Manual page 417

Parameters
Parameters
profile_id
access_id
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies the index of the access list profile.
Specifies the index of the access list entry. The range of this value is 1 to 200.
Specifies a VLAN name.
vlan
Specifies the source MAC.
source_mac
Specifies the destination MAC.
destination_m
ac
Specifies the value of 802.1p priority tag, the value can be
802.1p
configured between 1 to 7.
ethernet_type Specifies the Ethernet type.
Spcifies a VLAN name.
vlan
Specifies an IP source address.
source_ip
destination_ip Specifies an IP destination address.
Specifies the value of DSCP, the value can be configured from
dscp
0 to 63.
Specifies that the rule applies to ICMP traffic.
icmp
type
code
Specifies that the rule applies to IGMP traffic.
igmp
type
src_port Specifies that the rule applies the range of TCP
tcp
dst_port Specifies the range of tcp destination port range.
flag
src_port Specifies the range of tcp source port range.
udp
dst_port Specifies the range of tcp destination port mask.
Specifies that the rule applies to the value of IP protocol id traffic
protocod_id
user_define Specifics the L4 part value.
Specifies the content of the trunk to be monitored
offset_chunk_
1,
offset_chunk
2,
offset_chunk
3,
offset_chunk 4
Specifies IPv6 class value.
class
Specifies the ICMP packet type.
Specifies the ICMP packet code.
Specifies the IGMP packet type.
source port.
Specifies the TCP flag fields .
417